Relating instance hardness to classification performance in a dataset: a visual approach

Machine Learning - Machine Learning studies often involve a series of computational experiments in which the predictive performance of multiple models are compared across one or more datasets. The...     

About the origins of residual stresses in <Emphasis Type="Italic">in situ</Emphasis> consolidated thermoplastic composite rings

In a context of cost reduction, in situ filament winding of thermoplastic matrix composites becomes an appealing process. As residual stresses could considerably affect the produced part, models were proposed to predict process-induced residual stresses. After developing a validated thermal model of the process, mainly three different aspects are here addressed: the continuous bonding occurring during the process, the effect of the processed layer on the structure, and the effect of the curvature of the mandrel. While stresses coming from the continuous bonding appeared to be negligible, consequent levels of stresses can be achieved due to an iterative compression of the structure by the tow (supposed to be under tension). The mandrel properties and the tow tension profile followed during winding are essential parameters that might induce several different stress states. A comparison between measured and computed end-to-end openings of split rings illustrates the accuracy of the proposed models.     

Solving identity delegation problem in the e-government environment

At present, many countries allow citizens or entities to interact with the government outside the telematic environment through a legal representative who is granted powers of representation. However, if the interaction takes place through the Internet, only primitive mechanisms of representation are available, and these are mainly based on non-dynamic offline processes that do not enable quick and easy identity delegation. This paper proposes a system of dynamic delegation of identity between two generic entities that can solve the problem of delegated access to the telematic services provided by public authorities. The solution herein is based on the generation of a delegation token created from a proxy certificate that allows the delegating entity to delegate identity to another on the basis of a subset of its attributes as delegator, while also establishing in the delegation token itself restrictions on the services accessible to the delegated entity and the validity period of delegation. Further, the paper presents the mechanisms needed to either revoke a delegation token or to check whether a delegation token has been revoked. Implications for theory and practice and suggestions for future research are discussed.     

Consequences and conjectures in preordered sets

In a preordered set, or preset, consequence operators in the sense of Tarski, defined on families of subsets, are introduced. From them, the corresponding sets of conjectures, hypotheses, speculations and refutations are considered, studying the relationships between these sets and those previously defined on ortholattices. All the concepts introduced are illustrated with three particular consequence operators, whose behavior is studied in detail. The results obtained are applied to the case of fuzzy sets endowed with the usual pointwise ordering.     

A particular approach for the Three-dimensional Packing Problem with additional constraints

This paper focuses on a restrained concretization of the general NP-hard Container Loading Problem that arises from a real world application. This particular problem can be informally described as: given different sets of bins and boxes, find the packing of the boxes into the smallest number of bins obeying some additional restrictions on the placement. The mathematical programming formulation that appears to better model this application is the Three-dimensional Bin-Packing Problem (3D-BPP) which is no more than an extension of the classic Bin-Packing Problem to the orthogonal packing of solid objects.We present an alternative non-linear formulation for the 3D-BPP version as well as new designed heuristic algorithms (CPBOX and BOXCP) for the approximation of the optimal solution using boxes and bins of heterogeneous dimensions. Moreover, we also present a heuristic specifically designed to work under very particular storage application restrictions. The numerical results indicate that all of these new heuristics have good performance standards especially when applied to replications of real input data.     

Control of absorption columns in the bioethanol process: Influence of measurement uncertainties

The alcohol lost by evaporation during the bioethanol fermentation process may be collected and recovered using an absorption column. This equipment is also used in the carbonic gas treatment, a by-product from the sugar cane fermentation. In the present work, the development of nonlinear feedforward–feedback controllers, based on neural network inverse models, was proposed and tested to manipulate the absorbent flow rates. The control purposes are: to keep low ethanol concentration in the effluent gas phase from the first absorption column (ethanol recovery column); and to reduce the residual water concentration in the CO₂ gas effluent from the second tower (CO₂ treatment column).Based on simulation studies, the neural network (ANN) controller performance was compared with the conventional PID control scheme application. The best ANN architecture was set up according to the Foresse and Hagan (1997) criterion, while the PID parameters were found from the well-known Cohen–Coon Equations and trial-and-error fine tuning.Initially, performances were evaluated for the system without concentration measurement uncertainties. From these tests, the ANN controller presented the smallest response time and overshoot for regulator and servo problems. Three uncertainty levels were applied afterwards: 5%, 10%, and 15%.The ANN controller outperformed the PID for all uncertainty levels tested for the ethanol recovery column. For the CO₂ treatment column, the ANN controller proceeded successfully under uncertainties of 5% and 10%, while the PID did not deal properly with uncertainties above 5%. The statistical F-test, besides the ITAE, ISE, and IAE performance criteria, were calculated for both controllers applications and then compared. They proved the superiority of the ANN control scheme.Using appropriately the proposed well-controlled absorption columns increases the efficiency of the bioethanol production plant and can also provide carbon credits by avoiding CO₂ emission into the atmosphere.     

BOO: Behavior-oriented ontology to describe participant dynamics in collocated design meetings

Facilitating meetings is not an easy task. To assist the facilitator, we have been designing intelligent support systems, which can help contextual sensemaking, decision making and action. However, these systems are constructed based on behavioral models that provide guidelines to understand participant behaviors. This paper presents an ontology to describe participants’ behaviors in collaborative design meetings and rules that correlate them with the group’s acceptance of the final product. This ontology describes the group dynamics at collocated meetings, using verbal and non-verbal cues of attention shifts and attention maintenance as its basic constructs. The objective of creating this ontology was to better understand face-to-face meetings to eventually help meeting facilitators identify issues that may lead to dissatisfaction with the final product through behavioral cues. The ontology was derived through extensive analysis of a series of engineering design session videos. The design group was composed of experts with similar backgrounds, but working in different divisions of the same company. Different points of view were argued and decisions were made at the end of each meeting. After each meeting, participants were asked to asynchronously commit to the decisions made in the group. Our ontology can be used to identify the factors that lead to an undesired outcome, and now serves as a basis for a new project, which uses rules to support design meetings, improve final artifact acceptance and reduce rework. Our conclusions point out correlations between designers’ behaviors and future artifact acceptance and actions that interrupt or bring back group attention. The ontology was validated through application to other meeting situations. These findings may guide software developers in the creation of tools to support group design, and may be applied by an intelligent system.     

WSDL and UDDI extensions for version support in web services

Versioning is an important aspect of web service development, which has not been adequately addressed so far. In this article, we propose extensions to WSDL and UDDI to support versioning of web service interfaces at development-time and run-time. We address service-level and operation-level versioning, service endpoint mapping, and version sequencing. We also propose annotation extensions for developing versioned web services in Java. We have tested the proposed solution for versioning in two real-world environments and identified considerable improvements in service development and maintenance efficiency, improved service reuse, and simplified governance.